Sprinkler System & Irrigation Installation & Repair in Moreno Valley, CA

When sprinklers start acting up, it is easy to waste water without noticing, and the damage can build up fast if a leak or valve issue is left alone. When we check systems in Moreno Valley, CA, we look at what you see in the yard and what is happening under the surface so we can find the real cause and get coverage back on track. If you are dealing with dry spots, soggy areas, or zones that keep cutting out, reach out now and we will set up a free estimate.

• Watering looks off: dry corners, runoff, puddles, weak spray, or heads spraying past the grass
• Damaged pieces: cracked heads, clogged nozzles, sunken heads, leaning sprays, or broken risers
• Zones not right: a zone that will not turn on, will not shut off, or runs low
• Leaks and wet spots: soggy areas that keep coming back, split lines, or loose fittings near valves
• Timer trouble: settings that reset, skip days, or run longer than they should
• What we do: pressure test, valve check, leak locating, head tuning, controller review, and full zone run

A well-installed irrigation system is all about control. We plan the layout so each zone waters what it is supposed to, without soaking one area and starving another. After the walk-through, we build the zones, install the lines and valves, place heads where they cover evenly, and add drip for planters and narrow strips. Then we set up the controller with a schedule that is easy to follow and run every zone to make sure the system is working the way it should. Typical install steps:

• Walk-through to review the yard and watering needs
• Zone planning for proper coverage
• Install and connect pipe, valves, heads, and drip
• Controller setup and basic programming
• Full test, fine tuning, and cleanup

Call now to get a free estimate in Moreno Valley, CA.

A reliable irrigation system should water evenly without constant tweaks or trial and error. If you keep changing the timer to deal with dry spots or puddles, something in the system is likely off. Pro Scape Landscaping Inc. installs and repairs sprinkler and irrigation systems with a full check of the setup so the solution actually holds. Licensed and insured, with experience since 2011, we focus on solid work, consistent coverage, and testing that confirms everything is running right before we leave.

• Custom zone planning: Layout is built around lawn, beds, sun exposure, and slopes to reduce waste
• Full system verification: Zones are run one by one, with heads and drip adjusted for even watering
• Cause-based repairs: Pressure, valves, heads, and controller settings are checked to pinpoint the real issue
• Clean, professional finish: Durable parts, solid connections, organized work areas, and a clean finish around plants, beds, and walkways